A3 Local Level Adjustment; Required Equipment; Procedure - Agilent Technologies E4991A Service Manual

Rf impedance/material analyzer

Hide thumbs Also See for E4991A:

Table of Contents

A3 Local Level Adjustment

The purpose of this procedure is to adjust the local level on the A3 Source Board.

Step 1. Run the adjustment program.

Step 2. Choose the A3 Adjustment in the Spot Adjustment.

It is possible to perform this item with the All Adjustment too.

Step 3. Make sure that nothing is connected to the E4991A.

Step 4. Follow the adjustment program instruction to update the correction constant.