Agilent Technologies E4991A Service Manual page 215

To Configure the A20 Digital Motherboard and BIOS (for serial prefix MY433
Figure 4-48 Advanced Chipset Control Sub-menu
Next, select "Advanced OS Options" using
displayed as shown in Figure 4-49. If "Installed OS" or "Enable ACPI" is incorrect, select
it using
If you want to exit from this page and return to main menu, press
Figure 4-49 Advanced OS Options Sub-menu
Boot Menu
The Boot Menu shown below is displayed by choosing "Boot" using
pressing
Chapter 4
keys, and change the setting by pressing
key at the BIOS Setup Utility main menu. The current setup states are
Troubleshooting
and later)
keys. The current setup states are
keys.
key.
keys and by
215