Agilent Technologies E4991A Service Manual page 201

To Configure the A20 Digital Motherboard and BIOS (for serial prefix JP1KH,
The windows are:
• Standard COMS Setup
The default settings of all the Standard CMOS Setup options are described in the
"Standard CMOS Setup" on page 202.
• Advanced CMOS Setup
The default settings of all the Advanced CMOS Setup options are described in the
"Advanced CMOS Setup" on page 203.
• Advanced Chipset Setting
The default settings of all the Advanced Chipset Setting options are described in the
"Advanced Chipset Setup" on page 204.
• Power Management Setup
The default settings of all the Power Management Setup options are described in the
"Power Management Setup" on page 205.
• PCI/Plug and Play Setup
The default settings of all the PCI/Plug and Play Setup options are described in the
"PCI / Plug and Play Setup" on page 206.
• Peripheral Setup
The default settings of all the Peripheral Setup options are described in the "Peripheral
Setup" on page 207.
• Auto-Detect Hard Drive
After replacing the A27 Mass Storage, you can confirm whether the connection
between the A27 and the A20 Digital Motherboard is good or not. Because, BIOS
automatically configures the drive parameters after A27 has detected.
• Change User Password
This option is unnecessary to use in the E4991A.
• Change Supervisor Password
• Auto Configuration With Optimal Settings
This option is unnecessary to use in the E4991A.
• Auto Configuration With Fail Safe Settings
This option is unnecessary to use in the E4991A.
• Save Settings and Exit
If you want to quit from BIOS setup utility without saving, select a "Exit Without
Saving". For details, refer to "Exit Without Saving" on page 209.
• Exit Without Saving
If you want to quit from BIOS setup utility with saving, select a "Save Setting and
Exit". For details, refer to "Save Settings and Exit" on page 209.
Chapter 4
Troubleshooting
JP2KH, and MY432)
201