Agilent Technologies E4991A Service Manual page 217

To Configure the A20 Digital Motherboard and BIOS (for serial prefix MY433
Figure 4-51 Power Menu
Save & Exit Setup When you want to change and save a BIOS option, Select "Exit" using
CMOS to Flash" using
using
now?" is displayed. Select "Yes" using
The BIOS setup utility is closed after the current settings are saved.
Exit Without Saving
If you cancel the changes in the BIOS option settings, select "Exit Discarding Changes"
using
The BIOS setup utility is closed without saving the current settings.
Chapter 4
keys at the BIOS Setup Utility main menu and press
and press
and press key. A message of "Save configuration change and exit
keys at the Exit Menu and press
Troubleshooting
key. Select "Save
key. Then select "Exit Saving Changes"
and press key.
key.
and later)
217