Tilting The Machine Head - Dürkopp Adler D869 e-con Service Instructions Manual

3.4.1
Cover
In order to access the components on the underside of the machine, you
must first tilt the machine head.
Fig. 6: Access to the underside of the machine
(1) - Machine head
(2) - Bartack

Tilting the machine head

To tilt the machine head:
1. Lift the lever (3).
2. Tilt the machine head (1) as far as it will go.
Erecting the machine head
To erect the machine head:
1. Erect the machine head (1).
2. Lift the lever (3) and erect the machine head (1) completely.
18
Tilting the machine head
For safety reasons, the machine head (1) is stopped by the bolt (2).
(3) - Lever
Service Instructions D869 e-con - 00.0 - 09/2023
Working basis
①
②
③