68
For topping off the oil reservoir, use only lubricating oil DA 10 or
oil of equivalent quality with the following specifications:
• Viscosity at 40 °C: 10 mm²/s
• Flash point: 150 °C
You can order the lubricating oil from our sales offices using the
following part numbers:
Container
250 ml
1 l
2 l
5 l
5.2.1
Lubricating the machine head
Pic. 23: Lubricating the machine head
①
②
③
(1) - Oil filler opening
(2) - MAX marking
Proper setting
The oil level must not raise above the MAX marking (2) or drop
below the MIN marking (3).
1.
Fill oil through the oil filler opening (1) up to the MAX
marking (2).
Operating Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
Part No.
9047 000011
9047 000012
9047 000013
9047 000014
(3) - MIN marking
Maintenance