Inserting The Machine Head - Dürkopp Adler 650-16 Operating Manual

Installation

11.8 Inserting the machine head

Steps
1. Fit the machine head into the cut-out in the table top using the
2. After depositing the machine head immediately bolt on the stop
The stop plate is part of the accessory pack accompanying the
machine head.
For machines delivered pre-assembled, the transport lug is in the
accessory pack.
Instruction manual 650-16 Version 00.0 - 07/2013
Fig. 47: Inserting the machine head
1
(1) Transport lug
transport lug (1).
plate (2), which prevents the head from falling when the
machine is tilted.
WARNING
Risk of injury due to the machine head tipping
Secure the machine head against tipping when
transporting the assembled machine.
2
(2) - Stop plate
57