Pausing Sewing; Disabling Standard Seam Appearances; Saving Seam Appearances - Dürkopp Adler 512 Assembly Instructions Manual

Programming
Operating Instructions 512/532 - 04.0 - 08/2016

5.12 Pausing sewing

1. Press the Reset button or press the pedal backwards.
 Sewing process paused, display shows error message E-
50.
2. Press the Reset button or press the pedal forwards to continue
sewing.

5.13 Disabling standard seam appearances

Standard seam appearances can be disabled so that they are no
longer displayed.
Prerequisite:
• Machine is in programming mode, Ready button LED is off.
1. Press the Memory button and button P1 at the same time.
 The Program display shows the seam appearance number,
the Function shows 0 or 1:
0 = Seam appearance is displayed.
1 = Seam appearance is disabled.
2. Press the +/– Function buttons to select a different seam
appearance.
3. Press the Ready button to confirm the seam appearance.
4. Press the +/– Function buttons to select between 0 and 1.
5. Press the Ready button to confirm the value.
6. Press the Memory button.

5.14 Saving seam appearances

Standard seam appearances can be stored under the seam ap-
pearance buttons P1 to P5, with a total of 50 memory locations
available.
The memory locations are called up via the +/– Function buttons,
the memory locations up to number 25 can also be called up using
single seam appearance buttons and combinations of these.
43