3. 3. 10. Utility Tray Installation
CAUTION Cutting injuries from sharp edges. Be cautious while handling platforms
and other accessories.
Figure 93: Utility Tray Assembly
Install as follows:
1.
Place utility tray ➁ on platform.
2.
Align mounting bores with platform.
3.
Fasten the utility tray ➁ using the screws ➂ supplied with the utility tray.
4.
Place rubber mat ➀ in tray ➁.
5.
Place bottles on the tray and secure with the O-rings ➃ supplied, as
shown in
Figure
NOTICE The use of the O-rings is recommended for speeds beyond 100 rpm.
Figure 94: Utility Tray with Containers Installed and O-Rings
Accessories
94.
107 / 143
➀ Rubber mat
➁ Utility tray
➂ Screws
➃ O-rings