Thermo Scientific Solaris Series Instruction Manual page 12

Physical harm caused by ignoring operative basics.
Never operate the shaker without a properly
ƒ
installed platform.
C A U TI O N
Never use the shaker if parts of its exterior are
ƒ
damaged or missing.
Never use a shaker with a defective hood spring. A
ƒ
defective hood spring is unable to safely hold the
hood in the fully open position.
Do not move the shaker while it is running.
ƒ
Do not lean on the shaker.
ƒ
Never load or unload the shaker until it has come to
ƒ
a complete stop and this has been confirmed on the
touchscreen.
Do not put anything on the shaker while it is
ƒ
running.
Do not touch the platform or any accessories on the
ƒ
shaker while it is running.
The shaker housing is not to be opened by the
ƒ
operator.
Protection may be impaired by incompatible
accessories.
Use only accessories for this shaker which have been
NO TI C E
approved by Thermo Fisher Scientific. For updated lists
check www.thermofisher.com.
To shut down the shaker:
Press the STOP key. Turn off the shaker at the
main switch. Pull out the power supply plug. In an
NO TI C E
emergency disconnect the power supply.
11 / 143