3. 3. 9. Separatory Funnel Clamp Installation
CAUTION Cutting injuries from sharp edges. Be cautious while handling platforms
and other accessories.
NOTICE Make sure to use the correct screws. There are two different screws
supplied. The longer screws with a red thread locker are to be used for securing the
vertical stand. The shorter screws without any thread locker are only to be used for
installing the separatory funnel clamp to the platform.
The separatory funnel clamp can be mounted on the shaker platform in two
basic orientations: horizontal and vertical.
➀
➂
Figure 90: Separatory Funnel Clamp Mounting Positions
The horizontal position ➂ in
slanted orientation shown at ➃. Additionally, the separatory funnel clamp can
be combined with the vertical stand (supplied as an accessory) to create the
vertical arrangements shown at ➀ and ➁. Also, the clamp can be installed
with the funnel tap facing downwards ➀ or reversed to obtain the upside
down configuration shown at ➁.
Accessories
➁
➃
Figure 90
can be adjusted in height to obtain the
104 / 143
Vertical
➀
Vertical Upside Down
➁
Straight Horizontal
➂
Slanted Horizontal
➃