Thermo Scientific Solaris Series Instruction Manual page 121

Highest Speed
At the highest speed of 525 rpm Solaris shakers can be operated with a
limited load according to table
the platform, accessories and samples installed on the shaker. Consider the
speed capability of applied clamps and vessels that might not be suitable
for that speed.
Model
Solaris 2000
Solaris 4000
Solaris 2000 I
Solaris 2000 R
Solaris 4000 I
Solaris 4000 R
Table 57: Maximum load at highest speed
NOTICE Always bear in mind that with rising speed clamps will start opening
and deliver additional temporary vibration to the system due to greater vessel
movement.
Weight-over-Speed Curves
The following weight-over-speed curves will guide you in setting up the
best speed-load combination for your normal use. The green area shows
speed-load combinations that cause none to minor vibration during shaking
operation. The red area shows speed-load combinations that may cause
strong vibration during shaking operation and can result in unwanted
movement of the shaker. As these charts are for guidance only, you must
pay attention when your speed-load combination comes closer to the red
area.
Be aware that your specific application conditions may cause unwanted
load or instrument behavior before reaching the shown borderline. Increase
the speed gradually to explore the behavior of your specific load. The load
contains the weight of the platform, accessories and samples installed on
the shaker.
NOTICE Each blue horizontal line in the following graphs denotes the empty weight
of a specific platform.
Loading and Normal Use
Table 57. The load includes the weight of
Maximum Safe Loads
3 kg
10 kg
4 kg
4 kg
8 kg
8 kg
120 / 143