Thermo Scientific Solaris Series Instruction Manual page 107

Funnel Installation
Figure 92: Separatory Funnel Clamp Assembly
1. Loosen the length adjustment locking knob ➄ and slide the front funnel
holder ➂ all the way to the front position.
2. Insert the rear end of the funnel ➀ into the rear funnel holder ➁.
3. Slide the front funnel holder ➂ backwards and place the stem of the
funnel in the opening of the front funnel holder ➂.
4. Adjust the front funnel holder ➂ to a convenient height and secure by
tightening the height adjustment locking knob ➃. By varying the height
adjustment, you can tilt the separatory funnel to a slanted position.
5. Secure the front funnel holder ➂ by tightening the length adjustment
locking knob ➄.
Accessories
106 / 143
➀ Separatory funnel
➁ Rear funnel holder
➂ Front funnel holder
➃ Locking knob, height
adjustment
➄ Locking knob, length
adjustment
➅ Screws without
thread locker