Thermo Scientific Solaris Series Instruction Manual page 70

Alarm
When an alarm is issued, the shaker stops immediately to avoid damage to
the samples and/or the unit itself. You must acknowledge the alarm
on the touchscreen before you can continue operation.
When an alarm is issued, the touchscreen display shows a red
bar on top of the current screen. The Info & Health Status area (➆ in
26 and ➇ Figure 27) displays a red alarm bell enclosed by sound waves.
Additionally, an audible alarm tone constantly sounds.
Beneath the red alarm bar, a newsticker shows a scrolling summary of the
current alarm. A Snooze button appears on the right side, allowing you to
temporarily mute the alarm. When the alarm condition is not cleared within
the snooze period, the audible alarm returns. The duration of the snooze
period can be chosen in the settings, as explained in the section
and Alerts" on page
Tapping the bell icon in the Info & Health Status area (➇ in
Figure 27) opens a screen that presents the full details of the currently active
alarm, as shown in
list item to expand it and read more.
Figure 37: List of Alarms
You can select the active alarm by tapping on the checkbox beside the alarm
item. Tapping the Acknowledge button will try to clear the alarm from the
list if the root cause has been cleared. When all alarms have been cleared
the Status icon switches back to the default green heart.
Graphical User Interface
71.
Figure 37. You can scroll through the list and tap on any
69 / 143
Figure
"Alarms
Figure 26 and