Thermo Scientific Solaris Series Instruction Manual page 96

Clamps
Each clamp consists of a vessel clip, one or two springs depending on the
clamp/bottle size and screws for mounting it on the platform. Only use the
screws supplied with the clamp.
➀ Spring Tube ➁ Spring ➂ Screws ➃ Clip Leg ➄ Spring
Figure 81: Clamp Details with 2 Springs
Install as follows:
1. If needed, attach the spring to the clip legs as shown in the illustrations.
2. The rubber spring tubes are positioned between the clip legs as shown
in the illustration. Some clamps use two springs. The second spring is
installed around the base of the clip assembly after it has been mounted
to the platform.
3. Attach the clip assembly to the platform with the screws provided.
Accessories
95 / 143