Thermo Scientific Solaris Series Instruction Manual page 103

➀ Mounting bores ➁ Adjustable rods ➂ Locking knobs ➃ Tray sidewall
➄ Anti-slide mat ➅ Screws
Figure 88: Dual Height Adjustable Vessel Clamp Assembly
Install as follows:
1. Lift the anti-slide mat to expose the mounting bores (items
88).
2. Place the adjustable vessel clamp on the platform and align the mounting
bores.
3. Mount the adjustable vessel clamp to the platform using the screws ➅
supplied with the clamp.
4. Place the anti-slide mat
5. Place the vessel(s) on the anti-slide mat
6. Loosen the locking knobs
7. Adjust the adjustable rod positions
clamped.
8. Re-tighten the locking knobs
9. Make sure that the vessel is securely clamped by lifting it gently.
Accessories
on the bottom of the adjustable vessel clamp.
➄
.
➄
.
➂
so the vessels are securely
➁
.
➂
102 / 143
in Figure
➀