Thermo Scientific Solaris Series Instruction Manual page 115

Shaker
Table of Contents

Advertisement

Slightly stained or dusted:
1.
Wet-wipe or disinfect mats on the platform from the top side.
2.
Moisten the mat.
3.
Wipe residues off with a sponge.
4.
Wet-wipe with a sponge soaked in clear water.
5.
Disinfect if necessary.
6.
Allow to dry for 24 hours.
Heavily soiled:
1.
Remove mat from platform for complete cleaning.
2.
Soak mat in water with diluted dishwashing soap.
3.
Rub down the mat thoroughly with a sponge to remove all residues.
4.
After cleaning, rinse the mat sufficiently with water.
5.
Disinfect if necessary.
6.
Allow to dry for 24 hours.
7.
Install as explained in the section
"Wet Mat Installation" on page
Accessories
"Dry Mat Installation" on page 109
109.
114 / 143
or

Advertisement

Table of Contents
loading

Table of Contents