Thermo Scientific Solaris Series Instruction Manual page 60

15. In the confirmation screen that appears, tap Next to continue.
Figure 23: Initial Startup - Administrator Passcode Change Confirmation
16. A screen with general physical installation intructions for the shaker is
displayed. Tap Next.
Figure 24: Initial startup - installation instruction
17. The Setup Complete window is displayed. Tap Next to finish.
Figure 25: Initial startup - calibrate or finish setup
NOTICE On incubated and refrigerated shakers, you may tap Calibrate and
run the procedure explained in the chapter
page 128.
Initial Startup
"4. 6. Temperature Calibration" on
59 / 143