Thermo Scientific Solaris Series Instruction Manual page 58

7. Select the desired time format and spin each dial of the wheel picker to
set the current time. Tap Next.
Figure 17: Initial startup - set time
8. Incubated and refrigerated shakers only: Select the desired
temperature unit. Tap Next.
Figure 18: Initial startup - choose temperature unit
9. Incubated and refrigerated shakers only: Click the blue arrow to set
the high temperature alarm and emergency shutdown thresholds. Tap
Next�
Figure 19: Initial startup - set high and low temperature alarm thresholds
10. Repeat the process for the low temperature alarm thresholds. Tap Next
to continue.
11. If you wish to continue without setting an administrator passcode, leave
Open Mode selected and tap Next to continue.
Initial Startup
57 / 143