Thermo Scientific Solaris Series Instruction Manual page 136

14. A list of the items to be upgraded appears. Tap OK to start upgrading.
Figure 117: List of Items to be Upgraded
NOTICE The GUI handles mutual dependencies for you: You select one firmware
item for updating and the software automatically adds all required items to the
install.
NOTICE If you select the H.M.I. option from the list shown in
the GUI firmware only, the GUI display will not respond to any further tapping
on the touchscreen's active area for up to one minute after you have started the
firmware upgrade. Please do not power off the shaker during this period, otherwise
the upgrade will not be completed successfully. The shaker will restart after a short
time and then be ready for use again.
NOTICE In the event that you select two or three options from the list shown in
Figure 115 to upgrade multiple firmware components in one go, the shaker must
not be powered off at any time during the entire upgrade process.
15. Various messages appear to inform you about the progress of the
installation, as shown in
Firmware Upgrade Install Messages
Figure 118:
16. When you receive the prompt to restart the shaker, turn the unit off and
back on using the power switch.
Firmware Installation
Figure 118.
135 / 143
Figure 115 to upgrade