Thermo Scientific Solaris Series Instruction Manual page 80

NOTICE Tapping Reset Menu lets you restore the navigation bar to its factory
setting at any time.
Figure 56: Customize Navigation Bar
Files and Info
This screen shows the serial number, the GUI application software and its
version, the shaker main controller firmware and its version, the parameter
file and its version, and the current operating system.
You can also tap Factory Reset to restore the shaker to the factory default
settings. Resetting to factory defaults requires the admin passcode and
erases all settings made using the Graphical User Interface. The event log is
not deleted by factory reset.
Figure 57: Files and Info
Scrolling further down reveals the Firmware button shown on the right side
of Figure 57. You can tap this button to install new firmware for the shaker.
For detailed instructions on installing new firmware, please refer to
Firmware Installation" on page
NOTICE New firmware must be obtained from an authorized service technician.
Service
The Service settings are restricted and can be accessed by authorized
service technicians only.
Graphical User Interface
132.
79 / 143
"4. 7.