Thermo Scientific Solaris Series Instruction Manual page 59

If you wish to set an administrator passcode now, tap Secure Mode.
Figure 20: Initial Startup - Choose Access Mode
12. In the passcode prompt that appears, enter an admin passcode using
the keypad and tap Next.
Figure 21: Initial Startup - Choose Access Mode
13. In the next passcode prompt that appears, enter your admin passcode.
14. In the third passcode prompt that appears, re-enter the admin passcode
one more time to confirm.
Figure 22: Initial Startup - Enter New Administrator Passcode and Confirm
Initial Startup
58 / 143