Thermo Scientific Solaris Series Instruction Manual page 65

2. Select the size of the previous orbit. Tap Calculate. The following
window appears while calculating speed.
Figure 30: Orbit calculated
3. Tap OK.
4. You can calculate the suggested speed for a custom size of orbit. To
calculate for a custom orbit, select Other�
5. Enter the size of the orbit.
Figure 31: Calculate custom sized orbit
6. Tap Calculate.
The Calculate Speed window appears, displaying the speed for the size
you have just entered.
Set Runtime
You can run the shaker in Continuous or Timed mode. In Continuous mode,
you stop the shaker manually at your discretion. In Timed mode, the drive of
the shaker stops automatically when the timer expires. You may choose to
display the timer as follows:
elapsed time: how long the shaker has been running since you have
ƒ
pressed the Start button, or
remaining time: how long the shaker will keep running until the timer
ƒ
expires
Tap the Time field (➄ in
1.
screen shown in
Graphical User Interface
Figure 26 and Figure 27)
Figure 32.
64 / 143
to open the Time Mode