Thermo Scientific Solaris Series Instruction Manual page 90

5. Roll the dials of the wheel picker to choose the start date and tap the
Set From Date button.
Roll the dials of the wheel picker to choose the end date and tap the Set
6.
To Date button.
Figure 75: Select Date Range for Charting
7. Scroll further down to display the Time Range options.
8. Tap to select 24hr Per Day, or tap Custom to chart a specific time period
and
a. Roll the dials of the wheel picker to choose the daily start time and
tap the Set From Time button.
b. Roll the dials of the wheel picker to choose the daily end time and
tap the Set To Time button.
NOTICE By choosing the start and end times you opt for charting the exact
period between two points in time. If you work with the 24 hr Per Day option,
the charting starts at 00:00 and ends at 23:59 each day.
Figure 76: Select Hours of the Day for Charting
9. Tap Save to save the changes or custom settings.
Graphical User Interface
89 / 143