Thermo Scientific Solaris Series Instruction Manual page 94

Dual Stack Platforms
NOTICE Dual stack platforms are not compatible with Solaris 2000 I/R and 4000 I/R
shaker.
Figure 79: Dual Stack Platform Assembly
Connect the upper and the lower platform by mounting them with the 4
pillars in each corner. Mount the pillars with the proper screws from the
upper and from the lower platform.
Tighten the screws gently to connect the pillar and the platforms. When the
locking tool starts bending, stop tightening.
The lower platform is the one with the mounting holes for connecting it to
the shaker. Make sure to have the lower platform on the bottom side when
assembling.
Accessories
➀ – Upper platform (no pinch
protection)
➁ – Lower platform (with
pinch protection)
➂ – Pillars (4x)
➃ – Screws for mounting the
pillars (4x for upper platform
and 4x lower platform)
➄ – Mounting holes
➅ – Locking tool
➆ – Screws for connecting
the platform to the platform
mounting plate on the shaker
93 / 143