Table of Contents
Advertisement
3. 4. Loading and Normal Use
Risk of fire due to triggered chemical reactions.
Do not operate the shaker at speeds that will cause the
contents of vessels to be thrown out.
WA R N I NG
Increase speed slowly. Try with water before using
chemicals.
Safety can be impaired by improper loading and
damaged accessories.
Make sure that the load (accessories and samples) is
ƒ
C A U TI O N
arranged symmetrically to the center of the platform.
When operating a dual stack platform, make sure that
the lower platform carries more load than the upper
platform.
Never overload the shaker. For maximum load refer
ƒ
to
the weight of the platform, accessories and samples
installed on the shaker.
Make sure that the accessories are installed properly
ƒ
before operating the shaker. Follow the instructions in
section
Risk of finger or hand injury by hood falling shut.
The hood of the shaker may fall shut inadvertently and
ƒ
pinch or squeeze fingers or hands, causing injuries.
C A U TI O N
This may happen when the hood spring is defective
and unable to retain the hood in its fully open position.
Do not operate the shaker with a defective hood spring.
Call Thermo Fisher Scientific customer service and have
the hood spring replaced immediately.
Loading and Normal Use
"Technical Data" on page 12.
„Accessories" on page
117 / 143
The load contains
90.
Advertisement
Table of Contents
