Thermo Scientific Solaris Series Instruction Manual page 75

Graphical User Interface
Figure 46 shows the Access Control screen in Open and Secure mode.
Figure 46: Access Control: Open Mode (left) and Secure Mode (right)
When you tap Secure followed by Save you will be prompted to enter the
admin passcode before the change can be confirmed. All units ship with
the same admin passcode pre-set at the factory and printed in the manual.
Likewise, any user who tries to change a passcode-protected setting will be
prompted to enter the admin passcode.
NOTICE The pre-set administrator passcode is "00000" .
The Change Admin Passcode button allows you to change the pre-set
passcode. If you tap the Change Admin Passcode button, you will be
prompted to enter the current passcode first, followed by the new passcode,
and then the new passcode one more time to confirm. The Your new
passcode has been saved message indicates that the operation has been
successful.
Calibration
The Calibration screen (temperature-controlled models only) opens a series
of screens to let you calibrate the shaker for precise temperature control. The
process is described in "Temperature Calibration" on page 128.
74 / 143