Table of Contents
Advertisement
Error
When a malfunction occurs, the shaker displays an error message and stops
immediately to avoid damage to the samples and/or the unit itself. The screen
turns all red and no further interaction is possible. An error message is shown
together with an Error Code, as can be seen in the example in
Figure 38: Error Screen
Handle the problem as follows and try to resume operation:
1.
Note the error code shown on the error screen.
2.
Tap Acknowledge to mute the alarm tone.
3.
Restart the shaker by powering it off and back on.
4.
If the error message still persists contact Thermo Fisher Scientific
customer service and indicate the error code displayed on the error
screen.
3. 2. 3. Settings
The second item on the navigation bar is the Settings icon. The screen
shown below appears when you tap Settings. The Settings screen holds
more buttons than can be shown in one go in the display window. You have
to scroll to see the remaining buttons, as shown on the right side of
Figure 39: Settings Screen
Graphical User Interface
70 / 143
Figure
38.
Figure 39.
Advertisement
Table of Contents
