Table of Contents
Advertisement
3. Operation
3. 1. Power on / off
Push the power switch at the right side to power the shaker on (I) or off (0).
The touchscreen shows the Thermo Scientific logo while booting.
When ready, the touchscreen shows the current status of the shaker.
3. 2. Graphical User Interface
The Home Screen is the default screen of the shaker's Graphical User
Interface (GUI). It is your starting point for operating the shaker.
On the Home Screen, you can:
set basic operating parameters such as shaking speed, time and
ƒ
temperature (temperature-controlled models only)
start and stop the shaker
ƒ
view status information and handle alarms and alerts
ƒ
navigate to other screens with status information and setup options
ƒ
The screen content differs slightly between the open air and temperature
controlled versions.
The Home Screen for an open air shaker looks like the example shown in
Figure 26.
Figure 26: GUI Home Screen for Open Air Shaker
Power on / off
0rpm
61 / 143
➀
Navigation Bar
➁
Speed Setpoint
➂
Start or Stop
➃
Info
Timer – Continuous or
➄
Timed
➅
Actual Speed
Health Status and
➆
Statistics
➇
Current Time
➈
Name of Unit
Advertisement
Table of Contents
