Adjusting The View; Pm Deviation Measurement Example - Agilent Technologies PSA Series Manual

Filter Type
This parameter is used to determine the way that the high pass and low pass filters
are implemented. the option for this parameter are the following:
FIR (0dB)
IIR (–3dB)

Adjusting the View

Press
Numeric results is the default setting. Toggle the key to
the waveform.
Press

PM Deviation Measurement Example

Figure 3-12 PM Deviation Measurement Result
Chapter 3
These filters have 0 dB of loss at the stop frequency. The
measurement speed with this type of filter is slow.
These filters have 3 dB of loss at the stop frequency. The
measurement speed with this type of filter is faster than the FIR
filter.
.
Trace/View
and
Span X scale Amplitude Y scale
Making Measurements
PM Deviation Measurement
Demod Waveform
to adjust the waveform display.
to view
97