Agilent Technologies PSA Series Manual page 164

Front-Panel Key and SCPI Command Reference
Measure
4.3.9 Modulation Distortion
Allows the user to switch to the Modulation Distortion measurement.
Mode:
Key Path:
Remote Command:
Notes:
Example:
4.3.9.1 SCPI Remote Commands
:CONFigure:MODDist
:INITiate:MODDist
:FETCh:MODDist[n]?
:MEASure:MODDist[n]?
:READ:MODDist[n]?
Index: n Results Returned
<Mnemonic>
0 Returns unprocessed I/Q trace data, as a series of comma-separated trace points, in volts. The I
values are listed first in each pair, using the 0 through even-indexed values. The Q values are the
odd-indexed values.
not specified Returns comma-separated scalar results, in the following order:
or n = 1
Return Modulation Distortion (dB or % depending on Display Units)
Return Modulation Distortion Ratio(–999.0 in Normal mode; in Ratio mode, dB or % depending on
Ratio Mode setting)
Ratio Reference Distortion (dB or % depending on Display Units)
Return Modulation Sinad(dB)
164
MRECEIVE
Measure, More
:CONFigure:MODDist
This key invokes Modulation Distortion Measurement.
:CONF:MODD
Chapter 4