Agilent Technologies PSA Series Manual page 181

Example:
4.4.2.2.3 Use Power Meter
Selects whether an external power meter is used, if yes the RF RMS power is measured, else RF Peak power is
measured.
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Remote Command Notes:
Example:
4.4.3 Tuned RF Level Measurement
There is only one view available for Tuned RF Level measurement. There are two windows:
Tuned RF Level Numeric Results Window (upper)
•
Measurement Settings window (lower)
•
Table 4-9 Tuned RF Level Measurement Result Window
Name
Tuned RF level
Table 4-10 Tuned RF Level Setting Metrics Window
Name
IFBW
Display Mode
Ratio Reference
Ratio Mode
Chapter 4
:RFP:AVER:TYPE EXP
:RFP:AVER:TYPE?
MRECEIVE
Mode Setup
[:SENSe]:RFPower:PMETer:USE YES|NO
[:SENSe]:RFPower:PMETer:USE?
YES
Saved in instrument state.
Yes | no
Global to the current mode.
:RFP:PMET:USE NO
:RFP:PMET:USE?
Corresponding Results
n=1 1st
Corresponding Results
It is the value of IFBW
It can be Normal or Ratio
It is the reference value for Ratio mode
It can be Log or Linear
Front-Panel Key and SCPI Command Reference
Measurement keys
181