Agilent Technologies PSA Series Manual page 166

Front-Panel Key and SCPI Command Reference
Measure
4.3.11 Audio Frequency
Allows the user to switch to the Audio Frequency measurement.
Mode:
Key Path:
Remote Command:
Dependencies/Couplings:
Notes:
Example:
4.3.11.1 SCPI Remote Commands
:CONFigure:AUDFreq
:INITiate:AUDFreq
:FETCh:AUDFreq[n]?
:MEASure:AUDFreq[n]?
:READ:AUDFreq[n]?
Index: n Results Returned
<Mnemonic>
0 Returns unprocessed real trace data, as a series of comma-separated trace points, in volts.
not specified or Returns comma-separated scalar results, in the following order:
n = 1
Return the measured audio frequency (Hz)
Audio Frequency Ratio (–999 in Normal mode, Ratio: dB or % depending on Ratio Mode setting)
Ratio Reference Frequency (Hz)
166
MRECEIVE
Measure, More
:CONFigure:AUDFreq
This key is grayed out when opt 107 is not available.
This key invokes Audio Frequency Measurement.
:CONF:AUDF
Chapter 4