Agilent Technologies PSA Series Manual page 247

4.4.9 Modulation SINAD Measurement
There is only one view available for this measurement.
There are two windows in this view:
Modulation SINAD Numeric Result Window (upper)
•
Modulation SINAD Settings Window (lower)
•
Table 4-27 Modulation SINAD Numeric Results Window
Name
Modulation SINAD
Modulation SINAD
Ratio
Table 4-28 Modulation SINAD Settings Window
Name
IF BW Type
IF BW
Detector Selection
Peak Hold
HP Filter
LP Filter
De-emphasis Filter
Chapter 4
Corresponding Results
n=1,1st
Modulation SINAD
n=1, 2nd
This result will replace Modulation SINAD when
Display Mode is Ratio
Corresponding Results
It can be Auto, Manual or Min
This value is the IF bandwidth set manually
It can be Peak +, Peak −, Peak +/– 2 or RMS
It can be On or Off
It can be None, 50 Hz or 300 Hz
It can be None, 3 kHz, 15 kHz, 30 kHz or 300 kHz
It can be None, 25 μs, 50 μs, 75 μs, or 750 μs
Front-Panel Key and SCPI Command Reference
Measurement keys
247