Agilent Technologies PSA Series Manual page 192

Front-Panel Key and SCPI Command Reference
Measurement keys
4.4.4 AM Depth Measurement
The AM Depth measurement consists of 2 views: Numeric Results View and Waveform View.
AM Depth Numeric Results View has two windows:
1.
AM Depth Numeric Results Window (upper)
•
AM Depth Settings Window (lower)
•
Table 4-11 AM Depth Numeric Results Window
Name
AM Depth
Modulation Rate
Modulation Distortion
Modulation SINAD
Table 4-12 AM Depth Settings Window
Name
IF BW Type
IF BW
Detector Selection
Peak Hold
HP Filter
LP Filter
AM Depth Demod Waveform View has two windows:
2.
AM Depth Waveform Window (upper)
•
AM Depth Numeric Results Window (lower)
•
Table 4-13 AM Depth Waveform Window
Marker Trace
Corresponding Trace
192
Corresponding Results
n=1 1st
AM depth output
n=1 3rd
n=1 4th
n=1 5th
Corresponding Results
It can be Auto, Manual or Min
This value is the IF bandwidth set manually
It can be Peak +, Peak -, Peak +/– 2 or RMS
It can be On or Off
It can be None, 50 Hz or 300 Hz
It can be None, 3 kHz, 15 kHz, 30 kHz or 300 kHz
Yes
AM depth vs. Seconds trace (n=0)
Chapter 4