Agilent Technologies PSA Series Manual page 199

Notes:
Example:
4.4.4.2.2.3 Ref Position
Allows you to set the display reference position to either Top, Ctr (center), or Bot (Bottom).
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Example:
4.4.4.2.2.4 Scale Coupling
Allows you to toggle the scale coupling function between On and Off.
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Dependencies/Couplings:
Chapter 4
If the Scale Coupling is set to On, this value is automatically determined by the
measurement result. When you set this value manually, Scale Coupling
automatically changes to Off.
:DISP:AMD:WIND:TRAC:Y:RLEV 0
:DISP:AMD:WIND:TRAC:Y:RLEV?
MRECEIVE
Amplitude Y Scale
:DISPlay:AMDepth[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:RPOSition
TOP|CENTer|BOTTom
:DISPlay:AMDepth[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:RPOSition
?
CENTer
Saved in instrument state.
Top | Ctr | Bottom
:DISP:AMD:WIND:TRAC:Y:RPOS TOP
:DISP:AMD:WIND:TRAC:Y:RPOS?
MRECEIVE
Amplitude Y Scale
:DISPlay:AMDepth[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:COUPle
0|1|OFF|ON
:DISPlay:AMDepth[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:COUPle?
ON
Saved in instrument state.
On|Off
See Restriction and Notes
Front-Panel Key and SCPI Command Reference
Measurement keys
199