Agilent Technologies PSA Series Manual page 180

Front-Panel Key and SCPI Command Reference
Measurement keys
4.4.2.2 Meas Setup
Accesses the Meas Setup menu.
4.4.2.2.1 Avg Number
Sets the number that will be averaged.
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
Min:
Max:
Example:
4.4.2.2.2 Avg Mode
Selects the type of termination control used for averaging. This determines the averaging action after the
specified number of average count is reached.
Repeat - After reaching the average count, the averaging is reset and a new average is started
•
Exponential - Each successive result after the average count is reached, is exponentially weighted and
•
combined with the existing average.
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Notes:
180
MRECEIVE
Meas Setup
[:SENSe]:RFPower:AVERage:COUNt <integer>
[:SENSe]:RFPower:AVERage:COUNt?
[:SENSe]:RFPower:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:RFPower:AVERage[:STATe]?
4, ON
Saved in instrument state.
1
1024
:RFP:AVER:COUN 10
:RFP:AVER:COUN?
:RFP:AVER:STAT OFF
:RFP:AVER:STAT?
MRECEIVE
Meas Setup
[:SENSe]:RFPower:AVERage:TYPE REP|EXP
[:SENSe]:RFPower:AVERage:TYPE?
REP
Saved in instrument state.
Repeat | Exponential
None
Chapter 4