Agilent Technologies PSA Series Manual page 168

Front-Panel Key and SCPI Command Reference
Measure
4.3.13 Audio Distortion
Allows the user to switch to the Audio Distortion measurement.
Mode:
Key Path:
Remote Command:
Dependencies/Couplings:
Notes:
Example:
4.3.13.1 SCPI Remote Commands
:CONFigure:AUDDist
:INITiate:AUDDist
:FETCh:AUDDist[n]?
:MEASure:AUDDist[n]?
:READ:AUDDist[n]?
Index: n Results Returned
<Mnemonic>
0 Returns unprocessed real trace data, as a series of comma-separated trace points, in volts.
not specified or Returns comma-separated scalar results, in the following order:
n = 1
Return Audio Distortion (dB or % depending on Display Units)
Return Audio Distortion Ratio(–999.0 in Normal mode; in Ratio mode, dB or % depending on Ratio
Mode setting)
Ratio Reference Distortion (dB or % depending on Display Units)
Return Audio Sinad(dB)
2 Return Spectrum of Audio signal.
168
MRECEIVE
Measure, More
:CONFigure:AUDDist
This key is grayed out when opt 107 is not available.
This key invokes Audio Distortion Measurement.
:CONF:AUDD
Chapter 4