Front-Panel Key and SCPI Command Reference
Front-Panel Keys
4.2.5 Input
This key provides the same behavior as that of Input key of the other options except the options for Input Port.
Under Mode Setup menu, parameters can be changed via using the Form.
4.2.5.1 Input Port
This key provides the same behavior as that of Input Port key of the other options except the new options for
"Audio" and "Audio Calibrator".
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Dependencies/Couplings:
Remote Command Notes:
Example:
4.2.5.2 Ext Atten
Sets the loss equal to the external attenuation used when measuring the device under test.
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Remote Command Notes:
Example:
144
MRECEIVE
Input, Input Port
[:SENSe]:FEED RF|AREFerence|AUDio|AFALign
[:SENSe]:FEED?
RF
Saved in instrument state.
RF | Amptd Ref | Audio | AF Calibrator
The AF and AF Calibrator keys are blank when opt. 107 is not installed.
Global to the current mode.
:FEED Audio
:FEED?
MRECEIVE
Input, Ext Atten
[:SENSe]:CORRection [:RF]:LOSS <rel_power>
[:SENSe]:CORRection [:RF]:LOSS?
0 dB
Saved in instrument state.
− 50 to +50 dB
You must be in the Basic mode to use this command. Use INSTrument:SELect
to set the mode. Value is global to Basic mode.
POW:RF:GAIN ON
POW:RF:GAIN?
Chapter 4