Agilent Technologies PSA Series Manual page 222

Front-Panel Key and SCPI Command Reference
Measurement keys
4.4.6 PM Deviation Measurement Definition
The PM Deviation measurement consists of 2 views: Numeric Results View and Waveform View.
PM Deviation Numeric Results View has two windows:
1.
PM Deviation Numeric Results Window (upper)
•
PM Deviation Settings Window (lower)
•
Table 4-19 PM Deviation Numeric Results Window
Name
PM Deviation
Modulation Rate
Modulation Distortion
Modulation SINAD
Table 4-20 PM Deviation Settings Window
Name
IF BW Type
IF BW
Detector Selection
Peak Hold
HP Filter
LP Filter
PM Deviation Demod Waveform View has two windows:
2.
PM Deviation Waveform Window (upper)
•
PM Deviation Numeric Results Window (lower)
•
Table 4-21 PM Deviation Waveform Window
Marker Trace
Corresponding Trace
222
Corresponding Results
n=1 1st
PM Deviation output
n=1 3rd
n=1 4th
n=1 5th
Corresponding Results
It can be Auto, Manual
This value is the IF bandwidth set manually
It can be Peak +, Peak -, Peak +/– 2 or RMS
It can be On or Off
It can be None, 50 Hz or 300 Hz
It can be None, 3 kHz, 15 kHz, 30 kHz or 300 kHz
Yes
PM Deviation vs. Seconds trace (n=0)
Chapter 4