Agilent Technologies PSA Series Manual page 174

Front-Panel Key and SCPI Command Reference
Measurement keys
Example:
4.4.1.2.3 Avg Number
Sets the number that will be averaged. After the specified number (average counts) have been averaged, the
averaging mode (termination control) setting determines the averaging action.
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
Min:
Max:
Example:
4.4.1.2.4 Avg Mode
Selects the type of termination control used for averaging. This determines the averaging action after the
specified number of average count is reached.
Repeat - After reaching the average count, the averaging is reset and a new average is started
•
Exponential - Each successive result after the average count is reached, is exponentially weighted and
•
combined with the existing average.
Mode:
Key Path:
Remote Command:
174
:FCO:GLEN 200.0 ms
:FCO:GLEN?
:FCO:GAUT OFF
:FCO:GAUT?
MRECEIVE
Meas Setup
[:SENSe]:FCOunter:AVERage:COUNt <integer>
[:SENSe]:FCOunter:AVERage:COUNt?
[:SENSe]:FCOunter:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:FCOunter:AVERage[:STATe]?
25, ON
Saved in instrument state.
1
8192
:FCO:AVER:COUN 10
:FCO:AVER:COUN?
:FCO:AVER:STAT OFF
:FCO:AVER:STAT?
MRECEIVE
Meas Setup
[:SENSe]:FCOunter:AVERage:TYPE REP|EXP
[:SENSe]:FCOunter:AVERage:TYPE?
Chapter 4