Agilent Technologies PSA Series Manual page 214

Front-Panel Key and SCPI Command Reference
Measurement keys
4.4.5.2.2 FM Deviation Waveform Window
If the Waveform Window is chosen, the following menu is available.
4.4.5.2.2.1 Scale/Div
Allows you to enter a numeric value to change the vertical display sensitivity.
Mode:
Key Path:
Remote Command:
Unit:
Preset:
State Saved:
Range:
Dependencies/Couplings:
Notes:
Example:
4.4.5.2.2.2 Ref Position
Allows you to set the display reference position to either Top, Ctr (center), or Bot (Bottom).
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Example:
214
MRECEIVE
Amplitude Y Scale
:DISPlay:FMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:
PDIVision <freq>
:DISPlay:FMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:
PDIVision?
Hz
1000
Saved in instrument state.
1 Hz to 1 GHz
See Restriction and Notes
If the Scale Coupling is set to On, this value is automatically determined by the
measurement result. When you set this value manually, Scale Coupling
automatically changes to Off.
:DISP:FMD2:WIND:TRAC:Y:PDIV 20
:DISP:FMD2:WIND:TRAC:Y:PDIV?
MRECEIVE
Amplitude Y Scale
:DISPlay:FMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:RPOSition
TOP|CENTer|BOTTom
:DISPlay:FMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:RPOSition
?
CENTer
Saved in instrument state.
Top | Ctr | Bottom
:DISP:FMD:WIND:TRAC:Y:RPOS TOP
:DISP:FMD:WIND:TRAC:Y:RPOS?
Chapter 4