Agilent Technologies PSA Series Manual page 179

4.4.2.1.3 Ratio Reference
If RF Power is to be displayed relative to a reference, enter the value as a ratio reference using this key.
Mode:
Key Path:
Remote Command:
Unit:
Preset:
State Saved:
Min:
Max:
Dependencies/Couplings:
Example:
4.4.2.1.4 Ratio Mode
The ratio reference and ratio mode function permits measurement result to be scaled to a reference. The
reference may be either a measurement result or a keyboard entry. The Log/Linear key enables measurement
results to be displayed in linear or logarithmic units.
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Dependencies/Couplings:
Example:
Chapter 4
MRECEIVE
Amplitude/Y Scale
:DISPlay:RFPower:RREFerence <real>
:DISPlay:RFPower:RREFerence?
:DISPlay:RFPower:RREFerence:AUTO 0|1|OFF|ON
:DISPlay:RFPower:RREFerence:AUTO?
dBm
0 dBm
Saved in instrument state.
–200 dBm
50 dBm
No
:DISP:POW:RREF –10 dBm
:DISP:POW:RREF?
:DISP:RFP:RREF:AUTO OFF
:DISP:RFP:RREF:AUTO?
MRECEIVE
Amplitude/Y Scale
:DISPlay:RFPower:RMODe LOG|LINear
:DISPlay:RFPower:RMODe?
LOG
Saved in instrument state.
Log | Linear
No
:DISP:RFP:RMOD LOG
:DISP:RFP:RMOD?
Front-Panel Key and SCPI Command Reference
Measurement keys
179