Agilent Technologies PSA Series Manual page 228

Front-Panel Key and SCPI Command Reference
Measurement keys
Example:
4.4.6.2.2.2 Ref Value
Allows you to set the absolute power reference.
Key Path:
Remote Command:
Unit:
Preset:
State Saved:
Min:
Max:
Dependencies/
Couplings:
Notes:
Example:
4.4.6.2.2.3 Ref Position
Allows you to set the display reference position to either Top, Ctr (center), or Bot (Bottom).
Key Path:
Remote Command:
Preset:
State Saved:
Range:
228
:DISP:PMD:WIND:TRAC:Y:PDIV 20
:DISP:PMD:WIND:TRAC:Y:PDIV?
Amplitude Y Scale
:DISPlay:PMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:RLEVel
<angle>
:DISPlay:PMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:RLEVel
?
rad
0.00
Saved in instrument state.
– 628 rad
628 rad
See Restriction and Notes
If the Scale Coupling is set to On, this value is automatically determined by the
measurement result. When you set this value manually, Scale Coupling automatically
changes to Off.
:DISP:PMD:WIND:TRAC:Y:RLEV 0
:DISP:PMD:WIND:TRAC:Y:RLEV?
Amplitude Y Scale
:DISPlay:PMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:RPOSition
TOP|CENTer|BOTTom
:DISPlay:PMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:RPOSition
?
CENTer
Saved in instrument state.
Top | Ctr | Bottom
Chapter 4