Agilent Technologies PSA Series Manual page 245

initialization for the Auto mode.
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Notes:
Example:
4.4.8.2.3 Average Mode
There are four modes which define how the average is determined.
Repeat: Adds the values for each measurement and divides this number by the Count value.
•
Exponential: Each successive data acquisition after the average count is reached is exponentially weighted
•
and combined with the existing average. Exponential averaging weights new data more than old data, which
facilitates tracking of slow-changing signals. The average will be displayed at the end of each measurement.
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Example:
Chapter 4
Meas Setup
[:SENSe]:MODDist:BANDwidth|BWIDth:TYPE MIN|AUTO|MAN
[:SENSe]:MODDist:BANDwidth|BWIDth:TYPE?
AUTO
Saved in instrument state.
Auto|Man|Min
The IF BW type "Min" is meaningful only when the Modulation Mode is
"AM". For FM, PM signal, the result will not be correct with this IF BW
Type.
MODD:BAND:TYPE AUTO
MODD:BAND:TYPE?
Meas Setup
[:SENSe]:MODDist:AVERage:TYPE REP|EXP
[:SENSe]:MODDist:AVERage:TYPE?
REP
Saved in instrument state.
Repeat|Exponential
MODD:AVER:TYPE EXP
MODD:AVER:TYPE?
Front-Panel Key and SCPI Command Reference
Measurement keys
245