Agilent Technologies PSA Series Manual page 215

4.4.5.2.2.3 Ref Value
Allows you to set the absolute power reference.
Mode:
Key Path:
Remote
Command:
Unit:
Preset:
State Saved:
Min:
Max:
Dependencies/
Couplings:
Notes:
Example:
4.4.5.2.2.4 Scale Coupling
Allows you to toggle the scale coupling function between On and Off.
Mode:
Key Path:
Remote
Command:
Preset:
State Saved:
Range:
Dependencies/
Couplings:
Notes:
Chapter 4
MRECEIVE
Amplitude Y Scale
:DISPlay:FMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:RLEVel
<freq>
:DISPlay:FMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:RLEVel?
Hz
0.00
Saved in instrument state.
– 4 GHz
4 GHz
See Restriction and Notes
If the Scale Coupling is set to On, this value is automatically determined by the
measurement result. When you set this value manually, Scale Coupling automatically
changes to Off.
:DISP:FMD:WIND:TRAC:Y:RLEV 0
:DISP:FMD:WIND:TRAC:Y:RLEV?
MRECEIVE
Amplitude Y Scale
:DISPlay:FMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:COUPle
0|1|OFF|ON
:DISPlay:FMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:Y[:SCALe]:COUPle?
OFF
Saved in instrument state.
On | Off
See Restriction and Notes
Upon pressing the Restart front-panel key or Restart softkey under the Meas Control menu,
the scale coupling function automatically determines the scale per division and reference
values based on the measurement results if this parameter is set to On. When you set a value
to either Scale/Div or Ref Value manually, Scale Coupling automatically changes to Off.
Front-Panel Key and SCPI Command Reference
Measurement keys
215