Agilent Technologies PSA Series Manual page 233

4.4.6.4.6 Capture Time
Sets the capturing data time. When in manual mode, the user determines the capture time; otherwise, it is
determined automatically by the measurement.
This key is available only when PSA firmware revision A.11.08 or above, or Option 23A is installed.
Key Path:
Remote Command:
Preset/Default:
State Saved:
Min:
Max:
Resolution
Example:
4.4.6.4.7 Fast Mode
Allows you to toggle the
Key Path:
Remote Command:
Default:
State Saved:
Range:
Example:
Chapter 4
Meas Setup
[:SENSe]:PMDeviation:CAPTure[:TIME] <time>
[:SENSe]:PMDeviation:CAPTure?
[:SENSe]:PMDeviation:CAPTure:AUTO 0|1|ON|OFF
[:SENSe]:PMDeviation:CAPTure:AUTO?
250 ms
Saved in instrument state.
1 μs
10 s
1 ms
:PMD:CAPT 0.25
:PMD:CAPT?
:PMD:CAPT:AUTO OFF
:PMD:CAPT:AUTO?
between and
Fast Mode On
Meas Setup
[:SENSe]:PMDeviation:FAST 0|1|OFF|ON
[:SENSe]:PMDeviation:FAST?
OFF
Saved in instrument state.
ON|OFF
:PMD:FAST ON
:PMD:FAST?
Front-Panel Key and SCPI Command Reference
. Fast Mode can speed up the measurement.
Off
Measurement keys
233