Agilent Technologies PSA Series Manual page 210

Front-Panel Key and SCPI Command Reference
Measurement keys
4.4.5.1.2 Ref Value
Allows you to set the display reference.
Mode:
Key Path:
Remote Command:
Unit:
Preset:
State Saved:
Min:
Max:
Dependencies/Coupling
s:
Notes:
Example:
4.4.5.1.3 Ref Position
Allows you to set the display reference position to either Left, Ctr (center), or Right.
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Example:
210
MRECEIVE
Span X Scale
:DISPlay:FMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:X[:SCALe]:RLEVel
<seconds>
:DISPlay:FMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:X[:SCALe]:RLEVel?
Seconds
0.0
Saved in instrument state.
1 ns
10 s
See Restriction and Notes
If the Scale Coupling is set to On, this value is automatically determined by the
measurement result. When you set this value manually, Scale Coupling automatically
changes to Off.
:DISP:FMD2:WIND:TRAC:X:RLEV 0s
:DISP:FMD2:WIND:TRAC:X:RLEV?
MRECEIVE
Span X Scale
:DISPlay:FMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:X[:SCALe]:RPOSition
LEFT|CENTer|RIGHt
:DISPlay:FMDeviation[1]|2:WINDow[1]|2|3|4:TRACe:X[:SCALe]:RPOSition?
LEFT
Saved in instrument state.
Left | Ctr | Right
:DISP:FMD:WIND:TRAC:X:RPOS CENT
:DISP:FMD:WIND:TRAC:X:RPOS?
Chapter 4