Agilent Technologies PSA Series Manual page 274

Front-Panel Key and SCPI Command Reference
Measurement keys
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Dependencies/Couplings:
Example:
4.4.14.2.4 Range Hold
In TRFL measurement, there are 3 ranges which may be used to measure over a range of
>100 dB. This parameter forces the measurement to remain in the current range. One use for this parameter is
when you are measuring unstable signals, which can cause the analyzer to switch between 2 different ranges.
Selecting holds the analyzer in the range you have selected.
RangeHold
Mode:
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Example:
274
Meas Setup
[:SENSe]:TTRFevel:RASWitch AUTO|MAN
[:SENSe]:TTRFlevel:RASWitch?
AUTO
Saved in instrument state.
Auto|Man
While Auto is selected, TRFL calibrated key must be grayed.
:TTRF:RASW MAN
:TTRF:RASW?
MRECEIVE
Meas Setup
[:SENSe]:TTRFlevel:RHOLd OFF|ON|0|1
[:SENSe]:TTRFlevel:RHOLd?
OFF
Saved in instrument state.
On | Off
:TTRF:RHOL ON
:TTRF:RHOL?
Chapter 4