Front-Panel Key and SCPI Command Reference
Measurement keys
4.4.6.2.1.2 Display Unit
Sets unit for Normal display mode.
Key Path:
Remote Command:
Preset:
State Saved:
Range:
Example:
4.4.6.2.1.3 Ratio Reference
If PM deviation is to be displayed relative to a reference, enter the value as a ratio reference using this key.
Key Path:
Remote Command:
Preset:
State Saved:
Min:
Max:
Example:
226
Amplitude Y Scale
:DISPlay:PMDeviation:UNIT RAD|DEG
:DISPlay:PMDeviation:UNIT?
RAD
Saved in instrument state.
rad | deg
:DISP:PMD:UNIT RAD
:DISP:PMD:UNIT?
Amplitude Y Scale
:DISPlay:PMDeviation:RREFerence <degrees>
:DISPlay:PMDeviation:RREFerence?
:DISPlay:PMDeviation:RREFerence:AUTO 0|1|OFF|ON
:DISPlay:PMDeviation:RREFerence:AUTO?
1.000
Saved in instrument state.
0.1rad
800rad
:DISP:PMD:RREF 1.0
:DISP:PMD:RREF?
:DISP:PMD:RREF:AUTO OFF
:DISP:PMD:RREF:AUTO?
Chapter 4